PE Plastic Pipe Extruding Machine

PE plastic pipe extruding machine Brief introduction (1)The extruder is controlled by transducer,it is easy to adjust,reliable and stable to run,low energy consume. (2)The screw and barrel of the extruder adopts Nitriding steel.The design is reasonable,the raw material plastication effect is good,the production is stable. (3)The shaping machine adopts centre-feeding mould,vacuum sizing,the cooling adopts water spray and combined cooling mode. The pipe specification is high accurate,the surface is good. It adopts special roller tractor,so that the pipe is not easy to deformate. (4)The winder is controlled by tork motor, which can effectively overcome tension defects. It adopts independent electric cabinet, so it is convenient to control and operate the winder during the process of production. Main technical parameter No. ItemTechnical parameter1ModelSJ-45SJ-65SJ-902Max. extruding capacity40 kg/h60 kg/h100 kg/h3Main driving power15 kW22 kW37 kW4Filter changing wayDurable filterDurable filterDurable filter5Heating power15 kW20 kW37 kW6Sizing wayVacuum sizingVacuum sizingVacuum sizing7Specification of pipeφ16-φ40 mmφ20-φ75 mmφ63-φ125 mm8Cooling waySpray ImmersionSprayImmersionSpray Immersion9Hauling off wayRoller type tractorRoller type tractorRoller type /caterpillar typefor hard pipe10Driving power of tractor1.5 kW2.2 kW4 kW11Winding motor6 N.m6 N.m12 N.m12Installation power40 kW50 kW85 kW13Overall dimensionL×W×HSoft pipe12 m×1.6 m×2.6 m12.2 m×1.6 m×2.7 m15.8 m×2.3 m×2.8 mHard pipe15 m×3 m×2.6 m16.5 m×3 m×2.7 m21 m×2.3 m×2.8 m